Among the best sources that I have found for information about many of these old fishing reels is vintage outdoor magazine ads. Unlike Shakespeare reels, Johnson reels carried no serial numbers so there is no ready look-up that I am aware of. It is often hard to tell when particular reels were produced. There seems to have been a lot of overlap in the production of various different models. I had always thought that the Johnson SABRA model reels came into production during the mid-sixties and continued until the mid or late seventies, reaching their greatest popularity during the early seventies. I ran across a copy of this ad which appeared in 1961 in an outdoor magazine. It features the SABRA with its famous dual-drag system. My understanding is now revised to expand the marketing window of the Johnson SABRA reel.
This ad shows the SABRA right along side and contemporary with the Johnson Century 100 and the Johnson Citation 110. The Johnson Gull pretty much a mystery to me. It is another early reel that I don't know that much about, but which I plan to obtain and review. I have nver seen one that I recall. Only pictures. It looks much like the Centennial which have no working knowledge of that is of much use. i do think we had one among our tacle when I was a kid. I just don't recall much about it--wxcept that the reel itself was heavier than the others--if my recollection is accurate. During this time, the Johnson Centinniel was also beoing produced, or had only been discontinued a short time before.
Another vintage magazine ad from 1950, very early in the history of the spin-cast reel, for me casts a new light on their history as well. But also for me such ads raise as many questions as they answer. Of interest as well is the advertisement of tubular steel fly-fishin rods from the era.
In the copy of the advertisement above we see the latest offerings of the time. An early ZEBCO spin-cast reel is seen alongside of an early Johnson spin-cast reel. The Wright-McGill Fre-Line reel preceded both Johnson and ZEBCO reels. The Fre-Line is strikingly similar to the earliest model Johnsons such as the one pictured here. I generally don't count any of these reels when I think of vintage spin-cast reels. Although sideways mounted, the quality of worksmanship and green anodized aluminum bell most nearly represents what I first recognize as modern-day spin-cast reels.
In some ways, I suppose the ZEBCO is similar to modern reels, but it had no line-release button either. The Fre-Line was promoted as suitable for fly-fishing, spinning, or casting. It was one of several original designs that used the closed bell with the small hole within the middle--that in my mind inspired both Johnson and ZEBCO models--both which re credited with being the first patented spin-cast reels. None of these reels had any kind of line-release button that became so identifiable with later spin-cast reels. Maybe my definition is arbitrary, but it was the line-release button that merely had to be pressed and then released when the cast had gained enough forward momentum that spelled the defining simplicity that I recognize as characteristic to the modern spin-cast reel. clearly, the Johnson Century 100 was the first reel to make this a popular feature.
It is fun to see such ads as the one below that feature a gang of different products from the same era, lending context to what was going on at the time. The style of the ads from this era as well as the art-work typifies a look that is often attributed to Norman Rockwell. Part of this look was merely the best production work that could then be done with the printing processes then available. Drawn or painted art was prefered over photographs because the color gradations were able to be more easily reproduced using four-coor process work that was common to slick magazine production of the era.
The ad below was used in an outoor magazine in 1956. It features a pink Princess version of the Johnson Century 100 aimed at women and girls. The green version is depicted too. The Johnson Citation, a beefier model reel that hold more line was mentioned as well. All bases were being covered in these ads. The spin-cast reel as we came to know it was barely even invented at his early date. These reel models fueled an explosion in recreational fishing.
It may be interesting to note too that the pink Princess model spin-cast reels along with the inexpensive ZEBCO models--all attempts to corner broader segments of the market potential--may have been the reason spin-cast reels never gained the respect to make them a viable choice for the next generation of professional fishermen--who were incubating at this time. Professional torun ament style sport fishing is a relatively new sport also born of this era. Up and coming professional bass fishermen as well as well as other experienced fishermen were very likely put-off by any less thn macho identity with a pink reel that little princesses could use. It would be a mistake to underestimate the importance of a macho self-image was to this generation.
They did NOT want to be identified with a fishing reel that little girls could use--no matter how good the reel design was. It is only my own theory--having lived through this marketing cycle, and observed this phenomenon firsthand, that such marketing efforts may have actually led to discredit the spin-cast reel in the estimation of experienced fishermen. The message of ultimate simplicity and usefulness for any or everyone who wanted to fish that was conveyed, however, was probably more valuable economically, as it resulted in a vast number of fishing reels being sold.
It is also my contention that after the market had been trashed, that even ZEBCO had to distance itself from the novice fishing legacy it helped create by christening a new identity under which to market reels to the more experien ced an d profesional sportsfishermen. Quantum is this brand.
It did not take long for other manufacturers and vendors to adopt the new style of spin-cast reels from both established and respected fishing tackle names as well as numerous other upstart companies. As mentioned in other posts, the new design of spin-cast reels dove-tailed with Japan's rise to manufacturing prominence. Such old names as South Bend, Shakespeare, Wright-McGill, Penn all jumped on board with their models of spin-cast reels. Diawa was one of the Japanese reel makers that was well-made and that survives. Abu Garcia, a Swedish company was one of the old-timers that followed with many successful spin-cast reel designs very similar to the Johnson models.
The copy of a vintage ad below is early enough that the Johnson Century 100 model is still being referred to as the Denison-Johnson spin-cast reels. This was the name of the Johnson reel company that preceded the Johnson Century. The co-inventor of these reels, Denison, died before he ever saw the Johnson Century reel in production. The company's name was changed shortly thereafter.
Let me here take opportunity to correct a wide-spread piece of misinformation that has been spread all over the Internet. Samuel C. Johnson, a third generation principle of the Johnson Wax Company is being credited with inventing the spin-cast reel. I suppose this is a simple enough mistake to make if no research has been done. Samuel C. Johnson was indeed a big outdoorsman and environmentalist who later saw the purchase of the Johnson Reel Company a couple of decades after Dennison-Johnson invented their version of the spin-cast reel and successfully began the Johnson Reel Company. But the name similar name is mere coincidence. It was a different Johnson who co-invented the reel and started the company.
I don't have a Johnson Princess reel, so I borrowed this picture of a nice one that is advertised on eBay. They are asking a pretty penny for it--and they may get it as it seems to be in perfect condition and has the books with it. I am including the link to this ebay listing since I borrowed the picture. I have no other knowledge or association to this seller or the listing. I can't imagine that they will mind, since it is further advertisng for them.
I keep a Kayak
on my pond. Yeah, I know it is hard on the plastics to leave them
exposed to Ultraviolet. I keep it stored when I am not using it often,
and I have a cover for it as well. I have looked for a protectant to
apply to the surface. I recently found several UV protectants online while I was looking at
different Kayak accessories. I'll leave a link for this at the bottom of this post, and I will review this one and any others I find in the near future. This Kayak is new to me this year. I have
another one, but I saw a deal I couldn't refuse on this sit-on-top
Emotion Tandemonium model. These are pretty popular and I like this one a
lot, but I am having to customize it to my satisfaction. I have wanted
one of this style kayak for fishing for a while now. My other one is a
more conventional type Kayak with a entry cockpit that you sit inside, which is fine for some things but as my
personal mobility is increasingly compromised each year with age and illness, I have difficulty using the sit-inside style kayak.It is not ideal when you find tht the easiest way to disembark from your boat by intentionally capsizing in water deep enough to swim downward far enough to clear it.
There has been a explosion in the varieties of kayaks available today--from the more conventionally shaped sit-inside plasic craft to the sit-on-top plastic variety which lends greater stability and accessibility for big (fat) guys like me. My age and health may hinder my mobility walking and even being able to stand from the flat sitting position required by the sit-on-top model, but with a little ingenuity it does not have to prevent me from fishing from this more stable and portable platform. Using my bean-bag style kayak Ass-Set portable seat and flotation device, if I can get my old body there, I can then fish from the boat. The Ass-Set provides both back and butt support in good comfort as well as enough height above the kayak surface to make embarking and disembarking--from the seat, the kayak, and the water--if not easy, at least possible. The seat is light-weight and portable and it doubles as a flotation device in the unlikey event of capsizing. In such an event, the sit-on-top kayak style is more easily righted and boarded--even by a crippled old fat man.
Boats are quite often pertinent to any discussion of fishing methods. Often getting there is one of the most important ingredients to successful fishing. My dad usually kept a Jon-boat, which is a small flat-bottomed boat made for one-to-three passengers for fishing in lakes typical of the South that have a lot of Cypress trees and stumps growing in them. These boats are small and light-weight. They are sufficiently wide enough to provide a great deal of stability even while standing. they are usually built with two or three bench seats. They can be used with or without a gas-operated outboard motor or electric trolling motor. The stern of a Jon-boat is about half again as wide as is the bow.Jon-boats are also used to navigate and fish smaller streams and rivers, but not large ones or big waters with white-capping winds.
The bow of a Jon-boat is slightly up-swept along about the last quarter of the length with make forward navigation easier. A fisherman can sit in the bow of the boat and reach forward with a short sculling paddle and propel a boat slowly but precisely into very small nooks and crannies to tie up and fish or check trot-lines and whatnot. This is done by moving the paddle in a figure-eight pattern in the water while slightly forward leaning, which pulls the boat along very efficiently.
Jon-boats are now commonly made of aluminum. When I was a child, it was common to have Jon-boats made of wood. I remember when I was five years old, Dad having a local boat-builder make him a wooden Jon-boat. I recall the smell of fresh unfinished wood when he brought it home in his '57 Ford pick-up truck. Dad let me help him paint it with gray enamel paint. I am not sure what kind of wood the boat was made of but it was common to use black-gum or cypress to make boats because these woods are naturally impervious to water-logging; such trees thrive in swamps and lakes. The longitudinal boards of a wooden Jon-boat follow the grain of the wood and are carefully seasoned and then planed and put together very precisely and both nailed and glued to cross-pieces that keep them flush together almost as one piece. Jon-boats are still popular in the South for fishing.
The kinds of available small fishing boats have changed a lot during my life-time, as can
be said for so many things. I suppose that my generation is one of two
or three who have witnessed more changes than any others in history. This has had
its upside as well as its downside. I have mostly enjoyed the changes.
When I was a kid, kayaks were seldom used--except real ones by real
Eskimos who invented them. Canoes were fairly popular, but even they
were not in widespread usage in many places. For those who did use
them, aluminum canoes were the thing. They floated high, drawing very
little water, lending them to shallow streams where others could not go.
They were relatively heavy for portaging and getting to and from water,
but they could be carried on top of a vehicle easily enough. They were
tough too.
Canoes were originally developed and used by Native Americans--also known as Indians by some of us. Canadians apparently don't approve of this term, nor do they like the term Eskimo. However, most American Natives that I am acquainted with are from the USA; they are pleased to be called Indians or the most part, named more specifically by tribe. Inuits are what Alaskan Eskimos are now called, to be politically correct, but there again, all whom I know have no problem being referred to as Eskimos. I know a lot of them from my childhood family escapades, living in the Alaskan Bush. I am of very mixed heritage; but both my wife and I have substantial Indian lineage ourselves.
Apparently Canadian Native American Natives of the non-Indian, non-Eskimo variety
are said to be more sensitive about this. This is problematic for me
because I can never remember what they do like to be called. I am not
trying to offend anyone, so I will look it up and get back with you
after using this place-holder until I find it. Native Americans of what is now Canada and the Northern United States
fist develop real canoes. Canoes can be differentiated from more
primitive dug-outs in that they were made by first building a light
frame from pliable green limbs that were allow to dry--and then covering
the frame with bark. I feel sure that so e other barks may have been
used, but I know that Birch Bark is light and tough an d can be
stripped off of trees in large pieces. The bark was then seamed with
cordage and various resins to make the seams water-tight. These craft
were so light that they drew very little water, were reasonably tough,
and could be easily mended by readily available materials on the fly.
Flat-bottom boats, also commonly called Jon-boats, are made of wood or alluminum. They are a common site as used for fishing on small Southern fishing lakes. These rental boats at Lake Herb Parsons in Western Tennessee provide a lot of stability for family fishing. Such boats are commonly used with paddles or with small electric trolling motors and small gas-powered outboard motors. They are also popular for duck-hunting. A savvy fisherman can manuever a Jon-boat into position manually using a short-handled sculling paddle while seated in the more narrow bow by leaning forward and moving the paddle in a crepeated figure-eight patern--which slowly propells the boat forward. Oar locks are not generally used with Jon-boats. One or more occupants change the side from which they use their paddles to provide direction and momentum.
White European fur-traders and frontiersmen immediately saw the utility of canoes and adopted them for fur-trading. Though recognized widely as unique North American boats and used regionally, they did not catch on much elsewhere. European settlers and specialty boat-builders made beautiful canoes of spruce
timbers finely chosen, fitted, and finished to a high luster. These are
works of art. They are almost too fine to mess up by actually using.
paraffin treated canvas has also been used to make canoes. Fiberglass
and plastics --the difference in which is largely academic, were
starting to be used when I was a young man. Fiberglass canoes were tough
but heavy. Coleman was the first company to make wide use of
modern plastics to make canoes. Those original Coleman canoes were
tough, but relatively heavy, owing to their wooden or metal
infrastructures. Fiberglass and plastic canoes draw more water than do aluminum, or canvas canoes (Canvas canoes can draw lots of water as well, depending upon the weight of the frame).
Who says cats don't like water. This crazy stray loves to ride--giving new meaning to catfishing. My waterproof Ass-Set bean-bag uses boyant lightwieght filling in lieu of beans. The filling can be portioned, increased, or redistributed using a secondary bag. It is portable and impossible to sink and the whole thing is waterprooof. The seat provides enough height for me to get up and down inspite of my weight and imobility issues.
[The term draw, when used in the context of how much water a canoe draws, refers to how far down or how high up the craft rides on the water. Thus, saying that an aluminum canoe draws very little water, means that it rides very high on the water and therefore is capable of crossing shoals and other shallow areas more easily than a craft that draws more water. Generally, canoes and kayaks draw very little water because of their design and their light weight. This has always made them suitable for navigating shallow and narrow inland waterways.]
When I was in elementary school I lived in the Arctic. Canoes were not used there. The frigid waters during the brief summers were so cold that it was unthinkable to consider a craft that could be so easily capsized. The life-expectancy for one who falls into these waters is a matter of minutes before hypothermia causes death. However, during this time I became infatuated with the idea of canoeing and fantasized about traversing the rivers of the South where my roots lay. I got my hands on several books that dealt with the principles of canoeing and the various strokes that could be used to quickly and precisely navigate canoes with one two or three passengers.
I dreamed and visualized enjoying such activities so much during this time when there was no opportunity or even possibility of actually doing them that when I was finally able to get into a canoe--with the exception of briefly having to learn the trick of keeping ones weight centered and evenly distributed--that I took to using a canoe like an old timer. I have often thought of this unintentional use of visualization as an example of how skills can be learned, perfected, and practiced completely within ones imagination, in preparation for the real activity.
The Mississippi and Arkansas Rivers are too big and treacherous to be used with canoes except by the very experienced and daring. But many smaller clear-water rivers and streams in the south are ideal for canoeing. The Buffalo National River and Little Red River the White River are scenic North Arkansas rivers upon which I have spent many hours as a teen and young adult. In Southern Arkansas, the Saline and Quaita Rivers flowed and were part of my youthful recreational experience. Some of those once familiar sections of these rivers are now part of reservoirs that offer a different kind of recreational experience. This is not a bad thing--just different.
I remember when the Heber Springs Dam in Arkansas that harnessed the flow of the Little Red River near where some of my uncles lived was visited by then President John F. Kennedy. He dedicated it as an example of a great hydro-electric dam project, that brought abundant electricity to the area. The electricity that it brought was a good thing, but the Lake it created, Greer's Ferry Lake, was a wonderful adjunct for sportsmen and outdoor lovers in the area. The cool waters created by the depths of this lake also created a new phenomenon in those parts. Trout-fishing was introduced and has thrived ever since.
Cow Shoals, not far below the Greer's Ferry Lake Dam was created by the release of waters from the bottom of the lake when electricity is being generated. There is a trout hatchery located near there. The success of the transplantation of Brown Trout, Rainbow Trout, and Cutthroat trout into the tail-waters of the Little Red Red River here is one of the great successes of bringing tout to an area that previously had very few waters cold enough to have natural trout populations. I have fly-fished the Cow Shoals area for trout many times. The last I recall, the national Brown Trout weight and length record was caught in these very waters.
A similar story can be told regarding sections of the White River that artificially forms a number of lakes in Arkansas including Beaver Lake and lake Norfork. As a Boy Scout lving nearby, I was a participant in the first annual White River Invitational Canoe Race. This was a hundred mile race down a scenic section of the white River below the Norfork Lake Dam. There were three kids to a canoe. We began near Norfork park where the now famous Gaston's River Trout Resort hosted a fish-fry for us the night before we put in. I remember how our few canoes were borrowed from a local University on a whim so that we could participate. We were met with specialized Scouting High Adventure Explorer Posts from all over the nation and their sleek racing canoes, participants wearing racing wet-suits, and back-packed water bottles with racing straws and mouth pieces such as we had never seen (designed for the canoeists to drink without breaking the rhythm of their paddle strokes).
The following is a link to the Annual White River Canoe Race I participated in as a scout during its beginning, and later as an adult scout leader. The race is now in its 47th year.
http://www.scoutrace.com/
Some of our scouts from our regular Boy Scout Troop, had never even been in a canoe, but we all had heart. I will never forget waking up the morning after the first fifty miles where we over-nighted in Batesville before the second leg. When I stretched a hearty morning stretch, every muscle in my body cramped. After the second leg, I slept for a couple of days virtually comatose except for delirious dreams of paddles flashing in the sun. We did not win--not by a long-shot. but we did finish, which is more than quite a few more experienced participants could say.
Years later, my wife and I later served as the adult scouters supporting our participating Varsity Scout Group, bringing our little children along for the experience. We were the ground support and transportation for our participating scouts. By then, the race had become a three-day event for a total of one-hundred twenty miles. Our scouts were no better prepared than was my initial charter group, but great memories were made during both adventures. I have since trout fished up and down the White River from the Norfork Dam to Sylamore Springs and various secret spots in between.
Further down the river, where my oldest brother lived in Truman, the Whiter River flattens out and becomes much broader and deeper. here I have run trot-lines and yo-yos and caught catfish and bass aplenty. The White River eventually merges with the Arkansas River which in turn merges with the mighty Mississippi River. Different kinds of fish peculiar to the South such as Alligator Gar and the prehistoric Paddle-fish inhabit these parts of these waters. All of these present their own peculiar fishing challenges. However, I can honestly ay that no challenge have I met fishing any of these varied waters that those great old vintage spin-cast fishing reels could not handle in good stead. No other singular type of fishing reel--especially from that era--can do the same.
This vintage cast aluminum rod handle and rod seat came with this vintage Johnson 710 spin-cast reel. I had a vintage, but newer fiberglass casting rod made of composite that broke while casting. From the looks of the rod mount tube on the old metal handle, it was originally used with a six-sided bamboo pole. By cutting the fiberglass rod off cleanly and using epoxy to solidly splice an extension inside the old rod and to conform it to the rod handle, the resulting hybrid vintage combination provides excellent casting qualities and feel transmitted through the lure, line, and rod to the handle for an uncommon spin-cast experience. It is ideal for use with the old Johnson reel.
Although not nearly so glamorous as using fly-tackle, these old spin-cast reels can be used with flies both dry and wet, aided by a little additional weight in the form of either tiny split-shot and/or a cork or plastic fishing float, to place any fly in front of any kind of trout in the the upper stretches of the White River. In the big lakes that lie above or between these rivers, the same spin-cast reels will easily cast a full-sized plug or bait live or artificial and easily retrieve a big walleye, bass, carp, or catfish. Or within the middle sections where fish are want to be taken on spinners small or large--the very same spin-cast gear will do the job as well as any. I have owned and do own way more fishing gear than is needful or even useful--just because. I have spinning reels and bait-cast reels and fly-rods and reels. But I do understand and most often choose those vintage go-to standards choices of an era past. They don't get any better.
During this same period of my childhood, Kayaks were seen only as depicted in use by Alaskan Eskimos
and other arctic peoples until about thirty years ago or less. I did not even see one in actual use while living in the Arctic where they were once used comm0nly. These
were originally specialized craft made of frames of bone or willow limbs that were
covered with seal or other animal skins. A hole was open in the top
where the user got in and covered up with a like seal-skin skirt and
effectively sealed-in for the duration of the hunting trip against
frigid arctic waters. Using their unique two-ended paddles such light
craft could be maneuvered with agility and used in conjunction with
other hunters similarly outfitted, kayaks were used to hunt everything
from seals to whales.
About thirty years ago, small plastic kayaks exploded in to use recreational. An entire sport of white-water enthusiasts embraced
these new craft. They quickly began seeing use by anglers who liked
their portability and affordability. Around this time, I was an avid and
accomplish canoeist. I like aluminum canoes and took to them like
nothing else. The first time I got into a canoe at scout camp with two
other scouts, we swamped it immediately. Canoes require a different kind
of balance, but once this is learned, they are very stable. They are
very maneuverable. There are canoe strokes and techniques used with
properly fitted paddles that make soloing very easy without having to
switch sides to paddle. I became a die-hard fan of canoes for most of my
adult life. I still enjoy canoes.I don't recall the last time I
capsized a canoe. I used to stand on opposing gunwales barefoot and
engage in an activity called gunwale-jumping without the slightest fear
of capsizing. But no more. Age takes its toll.
Jon-boats have been in use in the South for fishing and duck hunting small bodies of water ever since Europeans first settled here. Until recently, they were made of wood. These boats are relatively inexpensive and provide a stable platform from which to fish or shoot. They can be manuevered though swampy waters and shallow streams. Pictured is an old boat that is likely the remnants of a duck-blind.
I first used a plastic kayak on the Buffalo National River. This is a tame but scenic float on the only River to ever be designated a National River. This designation a has ensured that at least one river in our nation will be preserve in its uninterrupted and free-flowing state for fishermen, nature-lovers, and canoe and kayak boaters can enjoy it from its tiniest original flow to its mouth. kayaks are one of the crafts of choice for floating this river. The Buffalo sustains small bass and goggle-eye rock-bass and perch and varied species of sun-fish. It is not a deep river along most of its flow, but some of the holes are too broad and deep to be easily traversed or waded while fishing. A canoe is not ideal lone fishermen. The earl plastic kayaks were okay for fishing except for their tendency to turn this way or that or rotate stern to bow endlessly.
Sit-on-top kayaks are fairly new. They generally have wider
but flatter frames which make them more stable than most
conventional-style kayaks. They are very light and float high in the
water. They are virtually impossible to swamp. A canoe can be un-swamped
and re-boarded by a fit canoeist, but it requires training in special
technique for doing this, and it requires superb strength agility and
fitness to be successful at this. However, just for informational
purposes, a swamped canoe will still keep multiple passengers who have
capsized afloat as long as they merely hang onto the sides and not crawl
on top of it. Sit-on-top kayaks can turn over, but they are virtually
impossible to swamp. Their slight topside-indention will not hold enough
water to submerge them if the interior portal is kept closed. They can
be easily turned upright and emptied of water. This is all advantageous
for many types of users. This design is also easier to get in an d out
of.
One of the drawbacks of the sit-on-top kayak design is that
there is no place to put your legs which can be quite uncomfortable as
you become less limber and out of shape (or fat and old and crippled).
However, with all the advantages this style of boat provides for a
fisherman, I have felt that with the proper kind of seat, I could use
one to good avail. They are so maneuverable and draw so little water
that they can be used about anywhere. They are light enough to be
potable and they are stable to sit on for fishing. They can carry a lot
of gear or extra passengers. I like to be able to carry an ice-chest a
lot of fishing tackle and an electronic fish-finder and sometimes my
wife and a dog. I like the versatility to navigate different kinds of
waters. But at my age and physical condition, a comfortable seat cushion
and adequate back-support could be a deal-killer.
There is an impressive kayak accessory market that includes a wide
variety of seats for virtually every use. People like me want enough
height to be able to make standing from a seated position within the
kayak more manageable without capsizing or busting a gut or blowing out a
knee. The seats that I have found that have enough height for me to
manage standing comfortably from and still have good stability when used
on my sit-on-top kayak are either very heavy or too flimsy or both. I
sometimes like tying to find solutions to such problems. As they say
necessity is the mother of invention. Usually when I find a solution to a
problem that I have encountered--it is also applicable as a solution
for others. I think I have found just such a solution for sitting
comfortably atop a kayak with sufficient height and stability for my
needs.
My new seat design is essentially a water-proof bean-bag filled with
light waterproof and highly buoyant particles instead of beans. The
entire seat weighs less than five pounds but will accommodate a large
adult male. It provides instant stability and conforms to my body with
unmatched comfort and support. It does not have to be strapped down or
to the kayak for stability, but it can be. It can be distributed in
different ways at different times or the filler can be added or removed
to a secondary pillow-bag. The seat is extraordinarily comfortable and
it also doubles as a great full-body flotation device in case of
capsizing. Another similar seat is equally suitable for a second
passenger or dog.
This seat, I have named the top-on Kayak Ass-Set makes long fishing
trips that were previously out of the question for me--now at least
doable. A user of this seat may get some funny looks initially--but
these looks are always followed by nods of approval, thumbs-up, and
questions about where they can be had. I am working on this. Inquiries
regarding prices and availability are being established as has been a
patent-pending status and production methods. If I do not produce these
for resale, I will provide detailed instructions about how to make them.
One way or the other, I will make this new design available for those
who want one.
I can tell you from my own experience that it will be less
expensive and way less trouble for you to buy one if I produce them for
resale. This is what I am looking into now. If I do not perceive enough
demand to mass produce these seats for less than you can personally
make one for--I simply will not produce them. But I will share my design
and the dos and don'ts that I have learned by perfecting my own ideal
kayak seat.
This is one of the UV Protectant Product that I have found. I cannot yet vouch for it, but I will provide a review in the future.
303 Aerospace Kayak Protectant 8 oz. This one seem to be the most well-known are is recommended by those who whould be in the know.
This is one Johnson reel model that I haven't had in recent years that I recall our family having at least one of when I was a kid. The Johnson 120 Centennial spin-cast reel reel came out around 1957 I think. It was made quite differently than other Johnson spin-cast reel models. It was a solid reel. The back part that contained the gears was made of cast metal and was sealed similar to sealed bearings. They were not intended to be serviced at home as were most Johnson models. The drag of the Centennial worked better than did the concurrent Century 100 and Citation 11o models. The main apparatus of the drag appears to have been very similar to the later model drags used in the beefier models such as the SANGA, and the 710.
The spools were easily changed for different line weights or types with the Centennial, just as were the Century, and I believe them to be the same spools.
This is a post to an interesting link that has an dialog pertinent to this blog as well. I am including two links to different posts at this source site. The first link expresses much the same preference for Jonson spin_cast reels over ZEBCO spin_cast reels. The writer also raises questions as to which of these two companies actually invented the spin-cast reel. The dialog that follows is interesting as well. Regarding this question, it is my take that both companies have some claim to inventing the spin-cast reel--AND that neither invented their versions of the spin-cast reel in a vacuum. There were several other commerically unsuccessful attempts that resembled each of these successful patents by ZEBCO and Johnson.
But it is clear to me that the spin-cast reel as we know it came to be with the introduction of the Johnson Century 100 in 1955. Many people still consi/der the Johnson Century 100, and subsequent 100A and 100B to be the best reels ever made. ZEBCO proponents might argue that point. There are plenty vintage examples of both company's reels prior to the Century 100 and after that are still working.
One comment from the dialog that I am particularly interested in is about the Johnson 170 Reel. I was not aware there was such a model. I am excited to learn more about it, as I have found no other references to it.
The second link was a response to my request at the other outdoor information site for a gentleman to post his recollection of the timeline of some of the vintage spin-cast reels built by Johnson. He once worked at the Johnson reel plant during the time some of the vintage reels were being produced. I have excerpted a portion of his answer here for easy reference. It is found below.
I will allow this site to speak for itself, although I have corresponded with some of the participants and commenters and they have also commented here on this site. I cannot vouch for any of the information found at other sites, but it is interesting to follow--and I appreciate any serious discussion that arises aimed at nai/ling down accurate information about the hi/story of spin-cast reels.
Glen, I wonder if you know and would take the time to list the
chronology as you know it of the different models of Johnson reels. I
have been mystified at times when I thought I had a good idea of the
years of production for different reel models they produced, only to
discover that I was way off base. I realize that some models overlapped
in production and others may have been differentiated by a secondary
designation of either no letter or A or B and what-not.
Some were apparently reintroduced after they had gone out of production
for a while. Then there were the models made for other companies under
different labels. Johnson reels were not always sequential with their
numbers either. Like what is up with the 710? Where did this number come
from. It was not sequential. It was not derived from the year 1971. It
has no relation to the gear ratio that I can see. What? LOL. I have
tired without success to post a link to this blog specifically about
vintage spin-cast reels. Someone told me that if I spell it out instead
of formatting it like a link that it might be allowed, so here it is if
anyone wants to wade through copying and reformatting it into link form.
We would sure like to have some comments about these and other
questions asked about these old reels at this site. Thanks for all of
your comments here. You have some valuable historic information.
notesandnods DOT typepad DOT com FORWARDSLASH the UNDERSCORE golden
UNDERSCORE age of UNDERSCORE spinca FORWARDSLASH
This is the Response:
Good Morning--I have been thinking about your post over the week-end. I
really don't have the years of production for the various Johnson reels
but I do know the sequence went from the reel name (century, citation,
etc.) to the name plus a letter. Ex., the first Century was a 100, next
came the 100A and then the 100B. The same with the Citation, 110,
110a, 110B. The Centenial reel was called the 120 (green cover), then
the 120A (red cover). Next came the Gull, a Centennial with a gray cover
(no longer in production). The Laker was just called the 140. The 710
was later changed to the 710A. No clue as to why it was called 710.
The next 710 was called a Commander. It was all black with a backcover
designed not to kink the line as the pushbutton was depressed. The
Sabra was at first just a 130, then became a 130A and 130B. I believe
there were two sidewinder reels made, the 44 and 90. They made two
plastic reels, the 088, then the 097 and lastly the 98. The Princess,
made in the mid 1950's, was pink. It was just a century that was made
to appeal to women--never caught on.
They also made reels for Montgomeery Wards (Century, Sabra and Laker).
These were a bronze color, very rare to find one in mint condition
today. If you want I have some pictures of them--you have probably
already seen these reels though. If you do want pictures of any of
these reels just let me know. I also have a couple of pictures of the
original factory in Mankato Minnesota and some miscellaneous Johnson
items like travel packs, Johnson jacket, first aid kit, etc. Just let
me know.
Sorry I don't know more about the sequence!
The Following is a Comment from another Person at the site:
factory replacement parts catalog show the sidewinder reel make in 7 or 8 models---10a-20-22-40-40a-44-60-80
they show a skipper as model 125, guide series in 150a 155 160 and
165, fiskar in 511 and 512------------------ if you go into category
[sporting goods] on ebay and type in [johnson reel ads] lot of stuff
will come up---------------------------------------------------- they
must have been in a rush to get the princess on the market i see century
marked side plates painted pink and the princess name stamped on the
cover. some of the old ads call the model 80 a new reel in
1954 and the 120 new in 1958
And Finally my Own Response Back to them:
Thank you so much--both Glen and Gene--for your information. It helps, although I am hoping that our discussion, along with my own additional inquiries at various places, including Mankata, MN web sites, will stir up and uncover some of those who may have been directly involved in the design and production of these reels who can shed additional light on this subject too. Any pictures that you get a chance to post here as well as on my spin-cast blog comments would be appreciated not only by me, but everyone who has a historic interest in these vintage reels. This is an important part of modern spin-cast reel history. It is too recent to be lost. Regards, PapaD
Please note that I have made requests to a number of sources seeking additional historic informaion regarding Johnsons reel tht I hope will lead to further accurate information. I will make such information available as I receive it. Meanwhile, I have a number of reels from Johnson and others that I have reviewed and will be posting pictures and inforai/on about.
I have dedicated this weblog to my next oldest brother, who I had hoped would contribute greatly to this blog. He was a big influence on me. May I here interject a tribute post to my own dad's wisdom and
practicality as it applies to spin-cast reels. Dad was a man's man. There was no question regarding his
macho. He was tough as nails. I doubt that it never entered his mind
to be put off by such nonsense as how it might appear that he used
spin-cast reels to do most of his fishing after Johnson changed the
fishing world with their designs.
Dad grew up fishing with whatever
tackle was available--including his hands. Dad could hog or noodle with the best of them. He knew how to make his own
fishing nets as was passed to him. He ran trot-lines
regularly on the Arkansas River. He hunted, and fished, and gigged frogs. He trapped in his younger days. Dad was typically pretty quiet, owing to a condition of his vocal chords that he developed about the time I was born that made it an effort for him to speak. His voice was raspy when he did speak. It required some throat clearing before he could spoke, which served as an early-warning system for everyone to hush and listen. So when he did speak, Dad usually had something worth listening to.
The way my father taught me to fish was very seldom by actively teaching, although I know that he consciously provided examples for the purpose of observing, and thereby learning. he taught by example. Sometimes I think his impatience to get on with things out-stripped his desire to teach by example. I find that I am inclined to be this way at times in my older years. But the mere proximity to such a passion for all things outdoors that was exhibited by my Dad and my older siblings counted for a lot. The availability of good fishing equipment and opportunities afforded by the exotic places we lived when I was growing up was also Dad's indirect hand in my education regarding the recreational outdoors.
Fish and game
were vital parts of my father's family's diet when he was growing up during the Great Depression. It was
consequently a good part of our family's chosen diet when I was growing up. Although Dad
was a consummate outdoorsman and adventurer who loved the recreational
aspects of hunting and fishing--to him fishing was mostly about catching
fish.
Dad could handle a fly-rod or spinning rod or bait-cast rig with proficiency. That he had fairly-well settled on early vintage Johnson
and Abu Garcia spin-cast reels for virtually all of his fishing pursuits
for the last half of his life--which incidentally was filled with
crazy-wonderful fishing all over the Arctic and the Bush of Alaska as well as the lower forty-eight--say
much for the true utility of those quality spin-cast reels. I was the baby of the family which had both its drawbacks and its perks. This family position is also
largely to blame for my exuberance regarding these old spin-cast reels.
Me? I
love fishing for the sport. I enjoy eating. I love spin-cast reels for their ingenuity,
utility, and historicity. But I realize that my Dad's preferences and conclusions by his middle-age when I came along shaped a lot of my
preferences. Still, they were reasoned conclusions and preferences--based on the practicalities of catching fish. I have owned and used all the major brands and styles of modern fishing equipment in my lifetime. I have scratched all the covetous itches that I developed as a kid long ago regarding fishing equipment, and for that matter, fishing experiences. I am experienced in my own right by this late date and past my prime, but I will forever regard my Dad as my original mentor and my superior in most ways including fishing knowledge and skills.
I made a reference to the ancient use of a gorge hook by primitive fishermen. A couple of readers wanted to know more about this, so here it is. It may be good to know some day.
A gorge-hook as used by primitive fishermen, is not a hook at all, in
the sense of having a crook or hook and barb on one end. Rather, it is a straight
piece of stick or bone that has been sharpened on both ends and notched
a bit in the middle where a fishing line can be securely tied without it slipping fro or to under pressure. The stick is then cocked up to
where it is straight with the fishing line. The bait is then secured
around it, holding it just so. When a fish takes the bait and gulps the
straight gorge-hook along with it and starts her run--the sharpened
ends of the stick straighten out and presumably gorges and sticks into
the fish's throat and is caught. These can be quite effective and is
worthy of knowing for survival purposes.
I made up few of these for a survival video I am doing. Although I have never caught a fish with one of these, I have every confidence that I can and will. They are said to be very effective using worms or cut-bait or blood-bait or dough balls for drum, and catfish, although I have not doubt that game-fish can also be taken with them. Before trying these, check their legality in your jurisdiction. I will try them in my pond. Whenever I do so, I will report my results here and show the fish and how the fish is caught. One disadvantage I see to using these is they may do more damage to fish that may pull loose or for-catch-and release for them to survive.
Of course in a survival situation this will be of little concern. In a survival situation, a fishing line may be braided out of unraveled fabric or fashioned from the fibers found in the stems and leaves of cattail reeds, green elm bark and other plants that lend themselves to making cordage. I plan to show this too in a future update to this post or a seperate post.
This is not the kind of cattail that I am referring to for cordage--unless you are ready for a scrap.
Recent Comments